logo_2021_perfil.jpg

WELCOME TO
JUNIAER MODEL AIRPLANES !

Art in Model Aiplanes

Welcome to Juniaer website!

Here we present our history and our products. Tradition of quality in the manufacture of high performance and high level handcrafted finishing model airplanes! Get in and know more about what we have to offer...

Mapa Mundi Juniaer
Mapa Mundi Juniaer

Presente em 36 países! Present in 36 countries!

press to zoom
Motorização
Motorização

press to zoom
Aeromodelos Juniaer
Aeromodelos Juniaer

press to zoom
Mapa Mundi Juniaer
Mapa Mundi Juniaer

Presente em 36 países! Present in 36 countries!

press to zoom
1/4
 
Top Gun 2022
Top Gun 2022

Ralph Esposito and Andrea T-27 Tucano 45TP Three-Time Champion on Static X-Class Category

press to zoom
Opcionais T-27 Tucano 50cc
Opcionais T-27 Tucano 50cc

press to zoom
Pintura Artística
Pintura Artística

AFA 35 anos

press to zoom
Top Gun 2022
Top Gun 2022

Ralph Esposito and Andrea T-27 Tucano 45TP Three-Time Champion on Static X-Class Category

press to zoom
1/29

OUR MODELS

T-27 Tucano 20cc

 

     After years of experience, improvements and evolution of technology we are pleased to present our new version of this classic and beloved model airplane so popular for its sport/scale aerobatic flight with docile and predictable aerodynamic behavior. A model that surprises by the scale visual, details such as antennas, rivets, panel lines, exhaust replicas, main and front landing gear doors (not installed), handmade painting with top quality finish, scale adhesives according to the painting scheme applied and varnished in the model, and also for the pleasure of flying, since it remains stable in high and low speeds, scale flaps give much realism and stability for landings and slow flight. Prepared for installation of retracts (not supplied) pneumatic, mechanical or electrical, a wide variety of equipment can be used without problems or adaptations. Prepared for installation of scale navigation lights (not supplied), wing tips and wing landing lights with clear lenses. This is the T-27 Tucano 20cc ARF Juniaer.

     High-quality epoxy resin model with structural reinforcements, low weight and high strength due to high technology FULL COMPOSITE vacuum lamination technique.

     2 piece wing (1 aluminum tube) laminated in fiberglass and epoxy resin with carbon fiber reinforcements and plywood and balsa laser cut structural parts. Ailerons, flaps, and elevators are factory hinged in perfect alignment. Wing and stabilizer servos are internal for improved scale appearance and fixed in structural plywood laser cut ribs for easy and quick installation and precise flight controls command.

     Fuselage made of epoxy resin laminated with fiberglass fabrics and carbon fiber structural reinforcements, providing high structural strength and low weight with extensive durability. Rudder to be installed with hinge points provided with the kit. Servo tray and tank tray in laser cut plywood. Great finishing with automotive paint, adhesives according to painting scheme and varnished for optimal durability. Transparent canopy and resin canopy frame can be installed fixed or with opening and closing mechanism, resin cockpit with replicas of seats and control panels, scale pilot available separately. Firewall installed with correct and definite angles, with center marking and drilling points. 2 part engine cowl provided without cutouts making it easy to access the engine for adjustments or checkups. It must be cut into the final assembly according to the position of engine, exhaust and installed accessories. Side door with opening and closing mechanism installed and ready to accommodate on/off switches, fuelers, voltage monitors and other equipment to be installed on the model aircraft.

          The T-27 Tucano 20cc is indicated as: Advanced Low Wing Trainer, for acrobatic initiation, the model airplane becomes very stable and docile at low commands rate and the flaps ensure support for a good landing. Stall speed reduced and enlived by Juniaer aerodynamics resources; Scale Model Airplane, for realistic flight reprodutions and acrobatics as cuban eights, slow rolls, 4 point rolls, stall turns, loopings, inverted flight, etc... ; Sport/Scale Model Airplane, for high adrenaline acrobatics as snap rolls, knife edge, high speed dives, lancevack, etc...

DOES NOT INCLUDE ASSEMBLY ACCESSORIES such as linkages, fuel tank, retracts, wheels, engine, spinner, propeller, radio and electronic equipments, etc...

     Specifications:

     Wingspan: 1797mm

     Lenght: (no spinner 1405mm)

                   (with spinner 1480mm)

     Weight (no acessories installed): 5.51 lb (2500g) FULL COMPOSITE

     Flying Weight: 11 to 13.22 lb  (5Kg - 6Kg)

     Engines:       Glow 2 cycle (90 to 120)

                           Glow 4 cycle (100 to 125)

                           Gas Burning (20cc)

                           Electric (450kV 1800W 18,5 to 22,2V LiPo)

     Rádio: Mínimum 6 channels with limited features - We recommend 7 or more channels

     Servos: All servos must be 55.5 oz/in torque or more.

     With gas burning engine all servos must be metal geared.

     Ailerons: 2 servos  Flaps: 2 servos  Elevators: 2 mini-servos 

     Rudder and steering: 1 servo 

     Throtle: 1 servo (except with electric motor)

     Retracts: 1 servo (pneumatic or spring air)  2 servos (mechanics) or servoless 

     Spinner: 2 1/2" (63,5mm)   WHeels: 2 3/4" (69,85mm) main and 2" (50,8mm) front

T-27 Tucano 20cc
T-27 Tucano 20cc

press to zoom
T-27 Tucano 20cc AFA
T-27 Tucano 20cc AFA

press to zoom
T-27 Tucano 20cc SIVAN
T-27 Tucano 20cc SIVAN

press to zoom
T-27 Tucano 20cc
T-27 Tucano 20cc

press to zoom
1/55

T-27 Tucano 50cc

 

     An innovative model airplane on the popular 50cc class that surprises by the scale visual, details such as antennas, rivets, panel lines, exhausts replicas, pitot tube replicas, main and front landing gear doors (not installed) , handmade painting with high quality finishing, scale adhesives according to the chosen painting applied and varnished in the model airplane, and also for the pleasure in flying, since it remains stable in high and low speeds, scale flaps give much realism and stability for landings and slow flights. Prepared for installation of retracts (supplied separately) pneumatic, mechanical or electrical, a wide variety of equipment can be used. Prepared for installation of scale navigation lights (supplied separately), wing tips and wing landing lights with clear lenses.

 

     High-quality epoxy resin model with structural reinforcements, low weight and high strength due to high-tech FULL COMPOSITE vacuum lamination technique. Wing and stabilizer in two pieces (1 aluminum tube in the wing and 1 in the stabilizer) laminated in fiberglass and epoxy resin with reinforcements of carbon fiber and structures in laser cut plywood and balsa wood. Clear canopy and resin canopy frame can be installed with open/close mechanism (not included), resin cockpit with instruments panels and seats replicas. Aileron, flaps, and elevators factory hinged with perfect alignment. Rudder to be installed with hinge points provided with the kit. Servos tray and tank tray in laser cut plywood. Wing and stabilizer servos installed inside the reinforcing ribs, allowing accurate and safe linkage. 2 piece engine cowl provided with no cutouts, making access to adjustments or engine checks and fueling easy. It must be cut in the final assembly according to the position of engine, exhaust and installed accessories. Firewall installed with correct and definitive angles, with center marking.

 

     Side door with opening and closing mechanism installed and ready to accommodate on / off switches, fuelers, voltage monitors and other equipment that are installed on the model aircraft.

 

     The indications of the T-27 Tucano 50cc are: Scale Model, for realistic flight reproduction and scale aerobatics, like Cuban eights, slow rolls, 4 point rolls, loopings, split S, etc. ... Reduced stall speed and smooth flight characteristics garanteeed by Juniaer aerodynamic features. Flaps guarantee lift for a good landing. Check out videos on our You Tube channel!

 

     Especifications:

 

     Wingspan: 90.55 in  (2300mm)

     Lenght: 80.71 in  (2050mm)

     Weight (no acessories): 10.15 lb    (4.400g)  FULL COMPOSITE

     Flying Weight: 22 to 26 lb (10Kg to 11,5Kg)

     Engines: Gasoline burning (50 a 60cc)

                      Electric Motors (230kV 5000W 33,3V to 55,5V LiPo)

     Radio: Mínimum 7 channels with limited features

                 We reccommend 9 or more channels

     Servos: All servos must be metal geared

     Rudder and steering: 1 servo 15Kg or more torque    

     Ailerons: 2 servos  Flaps: 2 servos  Elevator: 2 servos 10Kg or more torque

     Throtle: 1 servo (not used qith electric motor) 5Kg or more torque

     Choke:1 servo (optional) Retracts:1 servo (pneumatic/spring air) or servoless (electric)

     Spinner:3 1/2"(88,9mm) Wheels:3 3/4" to 4"(95,25mm-101,6mm) mains and 3 1/4"(82,55mm) front

T-27 Tucano 50cc
T-27 Tucano 50cc

press to zoom
T-27 Tucano 50cc EDA 2
T-27 Tucano 50cc EDA 2

press to zoom

Colombia Drakos

press to zoom
T-27 Tucano 50cc
T-27 Tucano 50cc

press to zoom
1/111

T-27 Tucano TurboProp 45

 

    After years of research, the Juniaer team is honored to introduce our Turbo Prop version of the T-27 Tucano model airplane, adapted from the 50cc platform with a carbon fiber mount for King Tech KT45TP turbine. Manufactured  100% with Full Composite, with exclusive air cooling system and realistic appearance. Tested and approved in flight, our solutions proved to be at the height of the most demanding modelists and pilots, providing an international quality ARF kit manufactured in Brazil with the best materials available in the market.

Specifications:

 

 Wingspan: 2,30m (90.55 in)                  Lenght: 2,05m (80.71 in) 

 Wing Area: 84,63 dm2                           Wing Loading: 113g/dm2

 Weight: approx. 4,6 Kg (10.14 lb)        (without accessories)

               11,5 a 12 Kg (25.35 to 26.45 lb) (flying weight)

 Radio: Minimum 12 channels  (not included)

Recommended acessories:

- King Tech KT-45 TP turbine or Xicoy X45TP

- pair of 60º exhaust exits

- propeller    

- 3 1/2" aluminum spinner

- HD retracts landing gear set (must be reliable)

- UAT tank

- 8 units Tchê Jets carbon fiber horns

- 16 units 4-40 spheric conections

- 8 servos MG minimum 180oz-in torque

- 3 double air valves 

- 1 simple air valve for brakes

- 33 ft 3mm air lines (3 colours)

- 12 pairs of quick air conectors Robart or similar

- 20 units 3mm "T" conectors FESTO or similar

- 2 units air pressure gauges

- 2 units air fill valves

- 2 units large air tanks

- 2 units HD on/off switches (JR Gold style)

- 2 units 3200mAh LiFe 2S batteries

- 6.6 ft gasoline lines (4mm internal diameter)

- fueler and breather

- 8 aluminum servo arms

- 4-40 pull-pull system

- 4 units 4-40 full treaded wires

- 9,9V minimum 2100mAh battery for turbine

- 6 units air cilinders 38mm diam 2 3/4 lenght (gear doors)

- 12 units Tchê Jets door hinges

T27 Tucano TurboProp 45
T27 Tucano TurboProp 45

press to zoom
T-27 Tucano 45TP
T-27 Tucano 45TP

Foto: Rubens Barbosa

press to zoom
Xicoy X45TP
Xicoy X45TP

press to zoom
T27 Tucano TurboProp 45
T27 Tucano TurboProp 45

press to zoom
1/63

A-29 Super Tucano 85cc

 

     After years of research, design and detailing, the Juniaer team is honored to present the new A-29 Super Tucano model aircraft, designed for 85cc engine with carbon fiber engine mount for DLE-85cc engine.

     100% Full Composite manufacturing, with exclusive air cooling system and realistic appearance.

     Tested and approved in flight, our solutions have proved to be the height of the most demanding model aircraft, providing an ARF kit of international quality manufactured in Brazil with the best materials available on the market.

     Specifications:

     Wingspan: 2800mm

     Length: with spinner 2630mm

     Weight without equipment: g FULL COMPOSITE

     Flying weight: 16,5 Kg a 18 Kg

     Engine: DLE-85cc or electric equivalent

     Radio: 12 channels minimum

     Servos: All servos should be metal geared

     Rudder: 1 servo 20Kg/cm or more torque

     Front wheel steering: 1 servo 10Kg/cm or more torque

     Front landing gear door: 1 servo 10Kg/cm or more torque   

     Throttle: 1 servo 5Kg/cm or more torque

     Ailerons: 2 servos 15Kg/cm or more torque Flaps: 2 servos 20Kg/cm or more torque Elevator: 2 servos 15Kg/cm or more torque

     Retracts: servoless (electric) with electric or pneumatic brakes

     Spinner: 4 3/4"(120mm)

     More information coming soon

  

A-29 Super Tucano 85cc
A-29 Super Tucano 85cc

press to zoom
A-29 Super Tucano 85cc
A-29 Super Tucano 85cc

press to zoom
A-29 Super Tucano 85cc
A-29 Super Tucano 85cc

EDA

press to zoom
A-29 Super Tucano 85cc
A-29 Super Tucano 85cc

press to zoom
1/16
 
 

JUNIAER TOUCANEERS GALLERY

Captain Ralph Esposito
Captain Ralph Esposito

Top Gun 2020 1º estático / static 3º X-Class

press to zoom
Alfonso
Alfonso

press to zoom
Alessandro Paz
Alessandro Paz

press to zoom
Captain Ralph Esposito
Captain Ralph Esposito

Top Gun 2020 1º estático / static 3º X-Class

press to zoom
1/76
ADDRESS:

 

Rua Fabiano Soares , 223 - Centro

CEP 37.968-000 Monte Santo de Minas - MG

e-mail: juniaer@hotmail.com 

Tels: +55 (35) 3591-1036

+55 (35) 99149-8548 (Elton Uzai - Whatsapp)

 

 

OPENING HOURS

 

Monday - Friday: 08:00 - 17:30
Saturday: 08:00 - 11:30

Obrigado! Mensagem enviada.